The Stanley SOLIS K2300+ central heating pellet stove heats up to 16 standard radiators, has a 45kg internal hopper with 41 hours run time and has a 7-day timer and is 94% efficient.
Efficiency and control at the touch of a button
Powerful performance on demand - Max 18.8kW boiler output
Heats up to 16 standard radiators
High Efficiency up to 93.8% - almost 4 times more efficient than an open fire
Self-cleaning burner means reduced waste in your ash pan
45kg internal hopper runs for up to 41 hours from a fill of pellets
Fully adjustable in terms of time and temperature including sleep timer
Programmable controller with up to 6 on/off times per day
Flue outlet size 100mm
Rear flue outlet only
Approved to EN 14785 standard
External air compatible
Available in 4 colours - Grey, Claret, Black and White
Includes commissioning
Ecodesign 2022 ready
SOLIS K2300+ A+ Energy Label
Up to 2 years warranty on Stanley SOLIS K2300+ Pellet Stove
Pellet fuels (or pellets) are biofuels made from compressed organic matter or biomass. The SOLIS K100 Pellet stove is suitable for use with wood pellets certified to EN 14961-2 grade A1 with a diameter of 6 mm and a length that can range from 10 to 30 mm.
As fuel, pellets are completely environmentally friendly, as they are made entirely of natural wood, without glue or other chemical compounds. Pellets have a high calorific value (4.7 to 5.3 kW/kg) which means they produce high heat output comparable to dry wood or coal. Pellets also have a low moisture contemt which helps consistent combustion efficiency, as during the burning of fuel, any water content must be evapourated before combustion can occur.
Pellets must be stored in a dry place.
Use only good quality pellets, without sawdust.
The small quantities of sawdust normally present at the bottom of the bags should not be emptied into the tank, but should be held inside the bag while pouring the pellets carefully so that the sawdust remains inside.